VMC-1580/1370/1270/1160
- High quality resin sand cast iron
- Taiwan main axis
- Taiwan ball screw and lock nut
- Taiwan booster cylinder
- NSK bearing in Japan
- German R + W coupling
- Automatic lubrication system
- Selection of chip conveyor
Introduction
Features of machining center:
High quality resin sand cast iron
Taiwan main axis
Taiwan ball screw and lock nut
Taiwan booster cylinder
NSK bearing in Japan
German R + W coupling
Automatic lubrication system
Selection of chip conveyor
| Specifications | Unit | VMC1580 | VMC1370 | VMC1270 | VMC1160 |
| X-axis travel | mm | 1500 | 1300 | 1200 | 1100/1000 |
| Y-axis travel | mm | 800 | 700 | 700 | 600 |
| Z-axis travel | mm | 700 | 700 | 600 | 600 |
| Table size（L*degrees） | mm | 1700×800 | 1360×700 | 1300×700 | 1200×600 |
| Maximum table load | kg | 1500 | 1400 | 1300 | 1000/800 |
| T-slot(slot number*width*pitch) | mm | 5×22×135 | 5×22×140 | 5×22×140 | 5×18×100 |
| Spindle taper | - | BT50 | BT50 | BT40/BT50 | BT40 |
| Spindle power | kw | 15-18.5 | 15-18.5 | 11 | 11月15日 |
| Maximum spindie speed | rpm | 6000/8000 | 6000/8000 | 6000/8000 | 8000/10000 |
| Rapid traverse(X/Y/Z) | m/min | 2012/12/12 | 24/24/16 | 36/36/36 | 36/36/24 |
| Diameter of XYZ screw rod | mm/min | 6310/5010 | 6310/5010 | 6310/5010 | 4012/4016 |
| Feed motor | NM | 25/32/25 | 25/25/25 | 25/25/25 | 20/20/20 |
| Spindle nose to table | mm | 130-870 | 160-860 | 160-760 | 140-740/130-680 |
| Spindle center to columnsurface distance rail | mm | 810 | 780 | 750 | 650 |
| X-axis rail | mm | 55pin roller | 45pin roller | 45pin roller | 45pin roller |
| Y axis rail | mm | 45*4pin roller | 45*4pin roller | 55pin roller | 45pin roller |
| Z-axis orbit | mm | 55Roller/Hard Rail | 55pin roller | 45pin roller | 45Roller/Hard Rail |
| Positioning accuracy | mm | ±0.0075 | ±0.0075 | ±0.0075 | ±0.0075 |
| Repeat accuracy | mm | ±0.005 | ±0.005 | ±0.005 | ±0.005 |
| Machine weight.(about) | t | 13 | 10 | 8 | 6.9 |
| Dimensions | m | 4.3×3.2×3.1 | 3.87×3.17×2.92 | 3.75×2.28×2.4 | 3.4×2.5×3.0 |
